Rotor & Wing Magazine :: Products :: Engines

Displaying 81 - 100 of 646 stories.
June 14, 2013
FAA has granted parts manufacturer approval (PMA) to El Dorado Hills, Calif.-based Aerometals for the main rotor transmission on...
June 7, 2013
The U.S. Navy has granted an $8.4-million extension of an existing contract to Rolls-Royce of Indianapolis for further engineering services related to the AE 1107C powerplants on...
June 5, 2013
U.S. Naval Air Systems Command (NAVAIR) has issued a contract to Sikorsky valued at $435.3 million to build four new CH-53K test article aircraft, as the Navy’s aviation branch prepares to launch the upgraded variant of the manufacturer’s C-53 series transport helicopters.   The CH-53K is designed to carry up to 27,000 lbs (around 12,250 kg) over a range of 110 nautical miles under...
June 4, 2013
Donaldson Aerospace & Defense has agreed to supply inlet barrier filters (IBFs) for three AgustaWestland AW109 SPs in operation with Helicopters New...
June 3, 2013
The U.S. Navy has issued a contract for more than $7.5 million to Lynn, Mass.-based General Electric covering the critical hard tooling required for the...
June 1, 2013
Moving a step closer toward cleaner and quieter aircraft, Turbomeca displayed its core TECH800 demonstrator engine in public for the first time on Friday, April 26. This innovative core engine demonstrator was designed and tested by Turbomeca, although the program is the result of cooperation between 34 partners from 10 European countries, including 18 SMEs and 12 universities and other research centers...
June 1, 2013
  By the end of June, Le Bourget will be transformed, once again, into the aviation industry’s largest trade show. Helicopter manufacturers including AgustaWestland, AVIC, Bell, Boeing, Enstrom, Eurocopter, HAL, KAI, Russian Helicopters, Sikorsky and others will join the many service and equipment suppliers from the rotorcraft industry, in addition to the miles of fixed-wing aircraft displays...
June 1, 2013
Safran, parent company of Turbomeca, has reached an agreement to acquire Rolls-Royce’s 50 percent share in the joint RTM322 helicopter engine program for $380 million. The transaction is subject to regulatory approvals, and...
May 20, 2013
Kazakhstan-based aircraft maintenance provider Sky Tech has received certification from Safran to begin performing maintenance on Turbomeca...
May 1, 2013
Safran Engineering's first standalone Brazilian engineering contract comes in the form of modifications for a fleet of Helibras-built...
May 1, 2013
The North American arm of AgustaWestland uncovered plans Tuesday to produce the AW169 at its sprawling U.S. manufacturing complex at Northeast Philadelphia Airport (PNE), becoming a second location to the OEM’s plant in Vergiate, Italy. (The company also lists its facility in Yeovil, UK as “playing a major role” in the AW169 program). The announcement was part of a facility tour led by...
May 1, 2013
Sabers have been drawn and the battle is on for the deepwater offshore helicopter market that has already emerged. The large energy companies are now drilling exploratory wells in ocean depths of 10,000 feet or more at distances that exceed 200 miles from shorelines all over the world. The history of ocean drilling has always been in a leap-frog fashion with outward movement from shore generally being in...
April 29, 2013
Moving a step closer toward cleaner and quieter aircraft, Turbomeca displayed its core TECH800 demonstrator engine in public for the first time on Friday, April 26. This innovative core engine demonstrator was designed and tested by Turbomeca, although the program is the result of cooperation between 34 partners from 10 European countries, including 18 SMEs and 12 universities and other research centers...
April 23, 2013
Safran, parent company of Turbomeca, has reached an agreement to acquire Rolls-Royce's 50 percent share in the joint RTM322 helicopter engine program for $380 million. The transaction is subject to regulatory approvals, and would give Safran the revenue...
April 22, 2013
Eurocopter “now fully understands the root cause of the cracking and need to go to validation of both the final and immediate fix,” said outgoing President and CEO Lutz Bertling at the company’s headquarters in Marignane on April 18. He was addressing the problem with the main gear bevel shaft that has been identified as the “root cause of the crack initiation” that lay...
April 9, 2013
Eurocopter and Turbomeca have reached industrial cooperation agreements with Polish aviation maintenance company Wojskowe Zaklady Lotnicze No. 1 (WZL-1) to open two full assembly lines in Poland. The assembly...
April 8, 2013
Former British Prime Minister Margaret Thatcher, who died on Monday at age 87, may be remembered militarily for leading the United Kingdom in the campaign to retake the Falkland Islands in 1982, which had been invaded by Argentina’s forces in a surprise attack. She served three terms in office and her defining moment could be said to have been during the Falklands War. Her close relationship with...
April 3, 2013
I sit here pondering how to relate my recent experience with flying Eurocopter’s newest product, the EC175 medium twin. Let’s face it, for a steam gauge guy transitioning to glass within a span of 40 minutes, it’s easy to get lost in the Technicolor world of huge navigation and systems screens in concert with “many buttons.” The EC175 is currently on a world tour to showcase...
April 1, 2013
MD Helicopters CEO Lynn Tilton through the cockpit of the MD540F.    At HAI Lynn Tilton, owner of MD Helicopters, said she was scarred, but stronger for it, in her efforts to turn MD Helicopters around since buying the company in 2005. “I can feel the Howard Hughes legacy on my shoulders.” The latest MD product, the MD540F, is on many military wish lists, she said. “We have...
April 1, 2013
Turbomeca uncovered its TM800 during an unveiling ceremony at Heli-Expo, giving it the name Arrano.    In an unveiling that featured an almost Cirque de Soleil-style introduction with acrobats fitting for Las Vegas and CEO Olivier Andries perched above a crowd gathered around the company’s booth, Turbomeca took the wraps off its latest engine on March 5...
Pages: « Previous  1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 Next »

Live chat by BoldChat