Thursday, October 1, 2015
The Hangman Cometh?
NVG helmet mounts are designed to reduce injuries, but misusing them for convenience may pose risks.
|A U.S. Coast Guard aircrew member adjusts his night vision goggles.
Photo courtesy of U.S. Coast Guard
As with any technological advancement, however, we must be on guard for unintended consequences of NVG use. One such consequence is the practice of tying the NVG neck lanyard to your flight helmet rather than actually wearing it around your neck.
Having begun my helicopter aviation career in the U.S. Army more than 30 years ago with the AN/PVS-5 “cutaway” NVGs, I respect those who came before me and conducted the original testing with the first-generation, full-face systems. I can only imagine how challenging it must have been to focus one tube into the cockpit to see the instrument panel and one tube out to view the surrounding landscape. Attempting something like a full touchdown autorotation with absolutely no peripheral vision or depth perception takes a very special kind of chutzpah. When the original NVG full-face and cutaway AN/PVS-5 systems were first fielded, there was little to no available data showing how this new head-supported device was going to affect the wearer. Since then, however, significant efforts toward research and testing have resulted in a great deal of valuable information.
Based on a retrospective analysis by the Army in 1997, individuals using the older AN/PVS-5 goggles were found to have a 162% greater likelihood of suffering a head or neck injury compared to non-NVG users. (The AN/PVS-5s were affixed to the helmet with a Velcro-like fastener and surgical tubing with snaps.) Conversely, individuals wearing the newer ANVIS goggles tended to have a higher (but not significant) risk for injury compared to non-NVG users. The reason for this difference in risk exposure was basically that the newer system had a breakaway, or frangibility, feature incorporated into the helmet. The older system did not.
But using 6.5-lb helmets that incorporated enhanced visual capabilities without overloading the neck in severe crashes posed problems. Therefore, the Army’s Night Vision Laboratory at Fort Belvoir, Virginia, developed a spring-loaded, ball-socket mount that allowed the newer-generation, AN/AVS-6 night vision devices to detach during a crash at a goggle deceleration of 10g to 15g.
|A U.S. Air Force aircrew member exhibits correct use of the night vision goggles neck lanyard.
Photo courtesy of U.S. Air Force
The ITT NVG operator’s manual (TM-F4949-1) warns wearers to not attach the neck cord to the helmet. Doing so would “cause head and neck injuries in a survivable accident.” The manual also provides a part number for the neck cord (P/N A3144306) with a description that says the neck cord “attaches to the night vision device,” enabling it to be worn around the neck.
The U.S. Marine Corps’ Helicopter Night Vision Devices Manual also warns against attaching the neck cord to the helmet. The manual says, “It is strongly recommended that the AN/AVS-6 neck cord not be attached to the helmet in any way,” including wrapping the neck cord around the visor housing on top of the helmet. The neck cord should be long enough to allow it to hang around the base of the user’s neck, the manual says, adding that securing the AN/AVS-6 to the helmet by means other than the breakaway mount defeats the mount’s purpose and “may cause the user’s neck to be exposed to the deceleration forces of the head, helmet, and AN/AVS-6 in a crash.” This would increase the risk of neck injury, it says, “even in a minor mishap.”
Why then do individuals continue to tie the neck lanyard to their helmets despite research, data and warnings against doing so? Perhaps it is purely for convenience. If you leave the NVG attached when you remove your helmet, you wouldn’t have to reattach it when you don the helmet again.
But tying the AN/AVS-6 neck lanyard to the helmet means the lanyard can no longer distribute impact loading from the NVG mass across the wearer’s neck during a high-g incident. (Such an incident might be a hard landing; it even might be a simple fall while walking with the helmet on.) Depending where the lanyard is attached (generally the top and aft sections of the helmet visor housing), it would more than likely increase the neck flexion moment, which in turn increases the risk of injury.
|The neck lanyard can pose dangers to pilots who wear it incorrectly (above, left). Proper placement goes around the neck (above, right). Photos by
Rex J. Alexander
This practice also increases the potential that the wearer’s helmet will be pulled from the head during a high-g incident (due to the increased deceleration forces imparted by the NVGs on the superior/posterior portion of the helmet). Additional concerns include the increased risk of facial injuries should the NVGs not completely clear the front of the helmet and the NVGs hampering of a water egress during an emergency ditching procedure.
Some NVG experts point to recurring physical damage to NVGs when they are tied to helmets that are set down. When a helmet is placed on its crown, it tends to rotate toward the heaviest point, such as the side to which the NVGs are attached. The resulting minor impact can cause costly damage to the goggle tubes and misalignment of their inter-pupillary adjustment mechanism and focus knobs.
Although current documentation and research highly discourage this practice, there are still organizations that teach and, in some cases, encourage it. In one flight department, an executive staff member recently wrote in a letter responding to a crewmember’s safety concern: “The decision was made, and is still being taught today by the Flight Training Department, that the pilot or medical person has the option of securing the lanyard to their helmet, or, around their neck.” The staff member said each method has “pros and cons” and individuals are informed of the warning about securing the lanyard to their helmets, “so it is their choice,” adding “regardless of where it is secured, the goggles still have the capability to break away under specified g-loads.”
I am not aware of published research, documentation or articles that recommend tying the lanyard to the helmet as an acceptable alternative to the manufacturer’s recommended practices or describe advantages of doing so.
From a risk management and liability standpoint, the question then becomes: why, given the documented increase for risk in sustaining a neck injury, permanent paralysis or even death, would this practice be acceptable? It all comes down to a conscious and sometimes culturally driven decision to choose convenience over accepted standards and safety practices. However, in this case, doing something just for sake of convenience may spell disaster for the individual wearer even when he or she is involved in a completely benign and survivable incident.